Service hotline

13802331661

Contact

Address:No. 9, Zhujin 3rd Street, Zhujin Industrial Zone, Longhu District, Shantou City
Phone:13802331661
Fax:0754-87264299


Industry news

The need to pay attention to the safe operation of the slitter

Author:Hongsheng Date:2019-07-31 17:25   
The need to pay attention to the safe operation of the slitter
1. After the machine of the slitting machine is energized, the electric control door should not be opened at will, and the electrical file should be touched by hand to prevent electric shock and injury.
2. The operator of the slitting machine should not leave long hair, operate the machine with gloves, and tighten the cuffs (except for loading and unloading tools).
3. The machine of the slitting machine must not touch the roller by hand during the operation.
4. The part of the slitter tool should be confirmed to be locked. Do not touch it by hand during operation.
5. When the slitting machine visually observes the operation, the head should not be too close to the material and the roller.
6. Focus on the machine when the machine is operated.
7. The operator of the slitting machine operates in strict accordance with the operation process and has the qualification for employment.
8. The machine of the slitting machine must not rest on the machine any part of the machine.
9. When the machine of the slitting machine is running, do not arbitrarily hit the control box door, and use the body or hands, head, to touch the transmission part.
10. When loading the slitter, pay attention to the coordination of the force and the fixed position of the discharge, to prevent the raw material from falling off and hurting the foot.
11. When the slitting machine is cutting, pay attention to killing the unloading arm pulley to prevent the unloading arm and the take-up shaft from falling off the material and hurting the foot.
12. When opening and closing the door, be careful not to put the hand on the mechanism to prevent the hand.
13. The splitter clamp and the clamp wheel should not be touched by hand during operation.
14. All kinds of tools of the slitting machine shall not be placed on any part of the machine.
Slitting machine maintenance knowledge
1. Add lubricant to the brake joint and move it back and forth several times (three times a week, pay attention to cleaning)
2. The surface of the sliding bearing at the slitting plate of the slitting machine is added with a yellow butter tail and filled with a grease gun (once a week, clean the refueling place before refueling)
3. The scraping support shaft is filled with butter and moved to the left and right several times. (three times a week, pay attention to cleaning)
4, each adjustment roller, adjustment part of the lubrication oil (three times a week, pay attention to clean)
5. Put the butter on the surface of the discharge seat and the sliding bearing and move it left and right (every three days)
6. Add the butter to the upper and lower knife adjustment (worm gear) (three times a week, pay attention to cleaning)
7. Fill the lower shaft with the lubricating oil at the clutch (three times a week, pay attention to cleaning)
8. The drive shaft of the splitting machine toothless screw set, add butter and move it several times to the left and right (three times a week, pay attention to clean)